![]() ![]() ![]() ![]() On many vehicles, there are multiple on-board computers (ECUs) that reside on the OBD-II network. A status screen will indicate progress of the automatic protocol detection: OBDwiz will cycle through all legislated OBD-II protocols and detect which is used by your vehicle. When Auto-Detect is complete, you will see a dialog box similar to below: OBDwiz will check all known COM ports and baud rate options and auto-configure itself to work seamlessly with your OBDLink adapter. Your license key is located on the Quick Start Guide included with ElmScan 5.Ĭlick the 'Connect' button (circled in red below):Ĭlick the 'Auto Detect' button before clicking the 'Connect' button, circled in red here: LEDs off? Check OBD port, auxiliary port, and the cigarette lighter for blown fuses.Ĭlick Start > Programs > OBDwiz > OBDwiz. Note: Vehicles with push button start: press the button without stepping on the brake pedal. The red 'Power' LED will increase in brightness and the Tx/Rx LEDs will cycle on and off from left to right. Step 4: Turn ignition to "Key On, Engine Off" position The OBD port is usually found on the driver's side, under the dash.Ĭan't find your OBD port? Visit Step 3: Plug ElmScan 5 into your OBD port The 'Power' LED will turn a dim red when you connect ElmScan 5 to the PC's USB port. If the driver for ElmScan 5 does not install automatically, click on the link below to install the driver. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |